Grepcor Diamonde Inc

Fresenius Kabi

COMPOCOUCH

Safety

Adjustment/control buttons are arranged logically on the remote control. No tipping over of the couch in case of a donor collaps (up to 200 kg). Press only one button to immediately reach shock position. A new key system guarantees that the personnel stays in full control of the Compocouch.

The comfortable donation and apheresis couches

Quality and Comfort

Comfortable relaxation when sitting due to the twin-belt system and exchangeable bolster pad made of highly absorbent foam material.

The arm rests can be moved in and out to adjust seat width to suit individual requirements. Especially for whole blood donation the wedge shaped arm support promotes a comfortable vena puncture resulting in optimal blood flow.

The extra long foot section ensures a comfortable rest even for tall donors.

Hygiene

The smooth surface is easy to clean. The arm rests are fully padded for sturdyness and high resistance. In general all seals are closed to prevent any dirt collection while not in use.

Product Specification
Technical Data	Start A2	Start A3	Evolution A3	Evolution A4	Compochair
Width of arm rest	13.5 cm	13.5 cm	13.5 cm	13.5 cm	15 cm
Length of arm rest	60,5 cm	60,5 cm	60,5 cm	60,5 cm	57 cm
Base width	60 cm	60 cm	60 cm	60 cm	54 cm
Base length	219 cm	219 cm	219 cm	219 cm	188 cm
Total overall width	87 cm	87 cm	87 cm	87 cm	81 cm
Distance between arm rests (adjustable)	60 cm	60 cm	60 cm	60 cm	53 cm
Seat/base height	60 cm	56 cm – 78 cm	60 cm	56 cm – 78 cm	55.5 cm – 57.5 cm
Thickness of padding	8 cm	8 cm	8 cm	8 cm	6 cm
Color frame	light grey	light grey	light grey	light grey	light grey
Color arm and foot rest	dark grey	dark grey	dark grey	dark grey	dark grey
Electric motor with limit switch	2 x 24 V	3 x 24 V	3 x 24 V	4 x 24 V	1 x 24 V
Maximum load	200 kg	200 kg	200 kg	200 kg	150 kg
Net weight	87 kg	88 kg	89 kg	90 kg	48 kg
Room temperature	3°C – 40°C	3°C – 40°C	3°C – 40°C	3°C – 40°C	3°C – 40°C
Relative humidity	30% – 75%	30% – 75%	30% – 75%	30% – 75%	30% – 75%
CE/MDD	CE/Class l	CE/Class l	CE/Class l	CE/Class l	CE/Class l
Download Brochure	Compocouch

Fresenius Kabi

COMPOGUARD

Comfortable working station

The Gooseneck allows the operation of the CompoGuard® without bending down
The large in-line tray and the tube clamp enable comfortable loading of the blood bag
Transport case is also mobile and comfortable table during donation

Mixing / Weighing Device Combining Safety with Efficiency In Whole Blood Donation

Increased number of donations per fully charged battery

New high capacity Lithium battery technology
Enhanced capability of approximately 70 donations per battery charge for mobile donations
External charging station available
Battery easily exchangeable

Increased data management flexibility

Donation data now able to be downloaded via dedicated Fresenius Kabi USB stick

One further step towards paperless donation

A new software feature enables direct donor verification via name, surname and date of birth

Mobile donation system

Robust transport case for mobile donation

Product Specification
	CompoGuard Basic	CompoGuard Data	CompoGuard Complete
Description	CompoGuard Basic includes key functions, including accurate weighing and mixing, adjustable collection volumes and low flow alarms, for blood collections at an affordable cost. In-line tray Integrated safety clamp Large display Easy-to-clean soft keys	CompoGuard Data includes all the functionality and portability of CompoGuard Basic, plus: DECT* option and USB port for collection data transfer Optional: DonationMaster Net Data Management software system	CompoGuard Complete offers all the features of the CompoGuard Data, plus: Sealer and rechargeable battery Gooseneck designed to improve work station for operator comfort Basic Model + DECT* option + Gooseneck + USB port + sealer + rechargeable battery
Dimensions (H x W x D)	6.5 X 8.8 X 17.5 in	6.5 X 8.8 X 17.5 in	36 X 8.8 X 17.5 in Height is with Optenna extended
Weight	7.5 lbs	10.5 lbs	18 lbs
Download Brochure	Compoguard

Fresenius Kabi

COMPOSEAL MOBILEA II

The portable tube sealer for high quality seals

Mobilea II meets the high demands of professional sealing and combines it with the benefits of modern battery technology. The Lithium Polymer battery realises a high sealing performance and offers a portable light weight battery. Mobilea II is therefore designed for mobile sealing in donation teams or at processing departments. Furthermore the intelligent power management combines high quality seals with short sealing times.

CompoSeal® Mobilea ll - the portable light weight sealer with a high battery capacity

Modern Lithium Polymer battery provides a capacity of up to 1000 seals per full charge on standard blood bag tubes
Designed for portable use: Low weight power pack of just 760g, robust metal housing, rubber pads for shock absorption
High quality seals independent of the battery capacity
A utomatic adjustment of sealing time depending on tube thickness
A pproved for bedside sealing while donor is connected

Product Specification
Description	Weight	Dimensions (W x D x H)
CompoSeal® Mobilea II set	2364 g	39 x 11 x 30 cm
CompoSeal® Mobilea II powerpack	760 g	11 x 5.5 x 14.6 cm
CompoSeal® Mobilea II handsealer	320 g	21 x 9 x 3.5 cm
CompoSeal® Mobilea II charger	272 g	6.5 x 4 x 10.5 cm
CompoSeal® Mobilea II handsealer cable	82 g	146 x 1 x 1 cm
Transport case for CompoSeal® Mobilea II	930 g	39 x 11 x 30 cm
Download Brochure	Composeal Mobilea II

Hemocue

HEMOCUE HB 301

Get Easy Access to Lab-Quality Accuracy

Capillary, venous or arterial whole blood sample
Brief training with virtually no maintenance
Link result with patient ID for medical record integration
Printer interface

Accurate POC Anemia Screening From the Pioneers

Optimized for anemia screening in primary care and blood donation settings, the HemoCue Hb 301 System is a simple and convenient solution. The HemoCue Hb 301 System provides quick, easy access to lab-quality results without compromising accuracy, even in demanding climates with high temperatures and humidity.

With dedicated support and service as well as unmatched training and education based on 30 years of experience, you can count on HemoCue for the right solutions for all your needs.

Have Confidence in Your Answers at the Point of Care

Precise factory calibration against the ICSH reference method
Patented microcuvette technology with excellent lot-to-lot reproducibility
Built-in selftest
Blood-based liquid controls available

Product Specification
Principle	Absorbance measurement of whole blood at an Hb/HbO2 isobestic point; dual wavelengths (506 nm and 880 nm) for Hb measurement and turbidity compensation
Calibration	Factory calibrated against the ICSH reference method; needs no further calibration
Sample Material	Capillary, venous or arterial whole blood
Measurement Range	0–25.6 g/dL (0–256 g/L, 0–15.9 mmol/L)
Results	≤3 seconds
Sample Volume	~10 μL
Dimensions	140 × 70 × 160 mm (5.51 × 2.76 × 6.29 inches)
Weight	500 g (1.10 pounds) with batteries installed
Operating Temp.	10–40 °C (50–104 °F)
Power	AC Adapter or 4 AA batteries
Interface	Printer and HemoCue® Basic Connect™ including barcode scanner
Quality Control	Built-in selftest ; optional liquid controls
Download Brochure	HB 301

Thermo Fisher

CRYOFUGE

Heraeus Cryofuge 8 and 16
Blood Banking Centrifuges

Thermo Scientific large capacity centrifuges have a proven track record for reliability and productivity in blood processing centers. Now the enhanced capacity of 16 x 500 mL blood bags and userfriendly design of the Heraeus Cryofuge 8 and 16 blood banking centrifuges make working with large volumes easier and more convenient using the protocols you’ve already validated and in compliance with global standards. Enhanced ergonomics and compact design combined with the quick setup of traceable, reproducible runs makes this the centrifuge of choice for simplified blood processing productivity.

Enhanced ergonomics with push-button convenience

Thermo Scientific™ Auto-Door™ automatic centrifuge door opening and closing

Simplified operation and space-saving design

Thermo Scientific™ Auto-Lid™ instant rotor opening and closing with lid storage

Quick run set-up and standardization

Glove-friendly Thermo Scientific™ Centri-Touch™ interface with Thermo Scientific
Centri-Cross™ function to convert your existing protocols

Improved capacity to maximize productivity

Unique 16 x 500 mL blood bag capacity

Latest global safety and compliance standards

Certified by UL and CE
Meets MDD CE Requirements
Listed with US FDA

Product Specification
	Heraeus Cryofuge 8 Centrifuge	Heraeus Cryofuge 16 Centrifuge

Capacities	6 x 550 mL and 8 x 550 mL blood bags	12 x 500 mL and 16 x 500 mL blood bags
Maximum speed	5,000 rpm	4,700 rpm
Maximum RCF	7,295 x g	7,187 x g
Drive system	DuraFlex high torque brushless drive technology	DuraFlex high torque brushless drive technology
Imbalance tolerance	125 g in opposite loads	125 g in opposite loads
Accumulated centrifugal effect (ACE) integrator	Yes	Yes
Green technology	Refrigeration off when door opens; Eco-Spin windshielded rotors	Refrigeration off when door opens; Eco-Spin windshielded rotors
Control	Centri-Touch touchscreen interface	Centri-Touch touchscreen interface
Accel/decel profiles and existing protocol emulation	11 accel, 12 decel, multiple emulation profiles	11 accel, 12 decel, multiple emulation profiles
Modes	At start, at speed, time start	At start, at speed, time start
Step-runs	Yes, 30 profile/speed/time triplets, up to 3 steps each	Yes, 30 profile/speed/time triplets, up to 3 steps each
Maintenance tracking log	Yes	Yes
Protocol traceability	Yes, built-in Centri-Track run logging	Yes, built-in Centri-Track run logging
Performance range	Speed 300–5,000 rpm; RCF 26-7,295 x g	Speed 300–4,700 rpm; RCF 29-7,187 x g
Run time	99 hours 59 min 59 sec (1 second increment)	99 hours 59 min 59 sec (1 second increment)
Pre-cooling function	Yes	Yes
Temperature set range	-20 to 40°C, adjustable to 1°C	-20 to 40°C, adjustable to 1°C
Other functions	Multilingual selection, on-board training videos, user logging, user lock-out, automatic door opening, automatic rotor ID, on screen-display for imbalance, over temperature, stainless steel chamber, guidance display for error messages
Dimensions (H x W x D)	1015 x 816 x 900 mm (39.9 x 32.1 x 35.4 in)	1015 x 816 x 900 mm (39.9 x 32.1 x 35.4 in)
Weight	230V: 475 kg/1047.2 lbs; 400V: 495 kg/1091.3 lbs	230V: 475 kg/1047.2 lbs; 230V Water Cooled: 479 kg/1056 lbs; 400V: 495 kg/1091.3 lbs
Heat output	< 2 kW	< 2 kW
Power consumption	< 5,400 VA	< 5,400 VA
Certifications	UL, CE, MDD, FDA listed	UL, CE, MDD, FDA listed
Standards	EN 61010-1 3rd Edition, IEC 61010-2-020 3rd Edition, IEC 61010-2-101 3rd Edition, EN 61326-1 Class B, EN 61326-2-6, EN 62304, EN 62366, EN ISO 14971, EN ISO 13485
Warranty	2 yrs unit, 5 yrs power-train (motor shaft and drive) 5 yrs refrigeration	2 yrs unit, 5 yrs power-train (motor shaft and drive) 5 yrs refrigeration
Download Brochure	Heraeus Cryofuge 8 and 16

Fresenius Kabi

AMICORE

Thoughtful design and exceptional performance come together for a high level of efficiency and donor management

SmartRoute simplifies kit installation with a tray holder, a single cassette, tubing guides and color coded tubing
Centrifuge positioned at optimal height to streamline kit installation
Intuitive user interface provides easy navigation with large, user-friendly touch screens
Scales provide accurate fluid volume measurements
Process leukoreduction automatically provides leukoreduced platelets without the additional step of filtration
Intelligent flow control (IFC) automatically establishes optimal donor flow rates
Positive donor experience with saline infusion, numerical control of draw and return rates, regulation of citrate return, built-in pressure cuff and platelet post-count calculation features built in, with donor comfort and safety in mind
Donor indicators provide platelet collection progress and prompt donors when to sgueeze and release
Optional holders for sealer and scanner to be installed with AmiCORE Apheresis Sysyem

The AmiCORE Apheresis Sytem
is SIMPLE and SMART

The Fresenius Kabi AmiCORE Apheresis System provides a new level of platelet collection. Its innovative design helps to simplify each step of the platelet collection process, allowing operators more time to focus on donors. The AmiCORE system has an automated addition of Platelet Additive Solution (PAS) and concurrent plasma collection. It has scales to provide accurate fluid volume measurements. Donors can have a positive experience with its saline infusion, numerical control of draw and return rates, regulation of citrate return, built-in pressure cuff and platelet post-count calculation.

Major benefits of the AmiCORE Apheresis System

Innovative design helps to simplify each step of the platelet collection process, allowing operators more time to focus on donors
AmiCORE provides precise optical monitoring to enhance separation
Enhanced donor management tools provide blood centers with the flexibility to customize the platelet collection procedure to target a wide range of donors
Automated addition of Platelet Additive Solution (PAS) and concurrent plasma collection

Product Specification
Dimensions (D x W x H) height measured from the top of the solution pole down	91 cm x 71 cm x 145 cm
Weight	111 kg
Power supply (90 - 264 VAC)	100-240 V, 50-60 Hz
Consumables
BioP BioR Composelect Compoflex
Download Brochure	Amicore

Fresenius Kabi

COMPODOCK

Fully closed system – reduced odour and exhaust

The element heats the sealed tube ends without touching them. The tube ends of the docked tube remain sealed until the dock is completed and the waste tube ends remain closed for disposal (no risk of contamination). Smell and exhaust caused by burned PVC material is significantly reduced compared to systems using wafers. This is highly appreciated by operators with systems already in use.

The patented technology for sterile connection of PVC tubing – new and improved

CompoDock® is a unique machine that does not require wafers as it has a permantent heating element. This leads to a number of benefits on environmental/health and saftey aspects in operation

Quick and easy handling

Operation is quick, as no wafer loading is neces-sary. Wafer loss caused by jamming cannot occur. The loading of the system takes place in just two steps and is designed to prevent any problems with tube mix up. Finally, no contami-nated wafers have to be disposed.

New tube alignment

The new position cover prevents fail docks due to misalignment. Tube guards (see picture, marked area) position the tubes automatically in the right posi tion, whenever the cover is closed. This con-struction of the new tube alignment supports fail safe handling, which is especially attractive for intensive use.

Product Specification
Tube specification:	OD = 3.9 – 4.6 mm, ID = 2.8 – 3.1 mm
Power supply:	230/240V AC, 50/60 Hz
Dimensions:	340 × 220 × 450 mm (L × W × H)
Weight:	22.8 kg
Download Brochure	Compodock

Fresenius Kabi

COMPOMAT G5 PLUS

Wide bore tubing

Average separation time with Top and Bottom system typically 2 minutes
Large diameter reduces processing time up to 26%
Low hemolysis rate

The latest generation of automated blood component separators

The CompoMat G5 Plus standardizes blood component separation by combining the innovations of the CompoFiow closure device and wide-bore tubing for faster top and bottom separation.

The CompoMat G5 Plus combines innovations into one system for a faster top and bottom separation time than with standard tubing.

CompoFlow® cap principle

The traditional bag breaker is replaced by a patented cap, automatically squeezed by the CompoMat G5 Plus opener.

Advantages of the CompoFlow bag system

Standardized positioning, squeezing, and opening of the CompoFlow cap; fully automated
Special form coding prevents application errors
Reduced risk of hemolysis due to incorrect processing is especially attributed by standardization of the breakaway opening process
More operator comfort

Product Specification
Dimensions (H x W x D)	20” x 14” x 21” (without PL- and RBC scales) 20” x 17” x 21” (with RBC scale) 20” x 22” x 21” (with PL- and RBC scales)
Weight	~66 lbs.
Power supply / Max. Power Consumption	100-240V, 50-60Hz / 240 VA
UL	UL® approved
System requirements	CompoMaster NET G5 software operates with the following systems: Intel® compatible CPU Min. 1.5GHz HDD Min. 20 GB RAM 1.5 GB Monitor Min. 1042 x 768 resolution (xGA), 17” Monitor recommended CD/DVD drive, min. one free USB port (USB 2.0)
Download Brochure	CompoMat G5 Plus

Fresenius Kabi

COM.TEC

Leukocyte collection

Stem cell collection
Lymphocyte collection (for ECP)
Granulocyte collection

The Multi-Procedural Apheresis Platform

COM.TEC® represents state of the art apheresis technology. The versatile applications for therapeutic plasma or red cell exchange, stem cell as well as platelet collections and cell depletions with only one device make the COM.TEC® the multi-procedural platform.

COM.TEC® offers reliable technology of camera controlled interface management for highly efficient procedures.

The easy to operate device is focussed on donor, patient and operator safety.

Highly efficient therapeutic protocols

Plasma or red cell exchange
Cell depletion
Plasma treatment with active and passive columns

Multi-procedural platform

Cell collection
Therapy
Cell donation

Product Specification
Programs	Therapy	Disposables
TPE	Therapeutic plasma exchange	PL1
RBC	Therapeutic red cell exchange or depletion	PL1
Adsorption	Therapeutic plasma treatment e.g. immunoadsorption	P1R
Depletion	Depletion of platelets or white blood cells	C4L

Programs	Leukocyte	Disposables
autoMNC stem cells	Automatic collection of peripheral blood stem cells, mononuclear cell collection or depletion	P1YA
autoMNC lymphocytes	Automated collection of lymphocytes in dual needle mode for consecutive photochemotherapy or DLI	P1YA
MNC	Peripheral blood stem cell collection, mononuclear cell collection or depletion	P1Y
BMSC	Bone marrow stem cell processing in vitro	P1Y + BMSC
Granulocyte	Granulocyte collection	P1Y
PBSC-Lymphocyte	Peripheral blood stem cell collection, lymphocyte collection or depletion	C4Y
RV-PBSC	Peripheral blood stem cell collection, reduced collection volume	RVY

Programs	Platelet	Disposables
PLT 5d	Platelet collection, 5-day storage (simultaneous plasma harvest possible), platelet depletion	C5L
PLT 5d	Platelet collection, Triple-concentrates, 5-day storage (simultaneous plasma harvest possible)	C5LT
PLT 5d-SN	Single needle platelet collection, 5-day storage (simultaneous plasma harvest possible)	S5L
Download Brochure	ComTec

Thermo Fisher

BLOOD BANK REFRIGERATORS

TSX Series High-Performance Blood Bank Refrigerators

Our high-performance blood bank refrigerators are designed to meet strict requirements established by the AABB for the storage of whole blood and blood components.

Factory pre-set to 4°C to meet blood storage guidelines
Heat-free defrost for maximum temperature uniformity
Convenient, stainless steel, fully extendable and adjustable drawers
Standard, built-in chart recorder
GMP Clean Room Class A / ISO 6 (ISO EN 14644-1) compatible with appropriate pre-install preparation
Four 2" casters for easy mobility; the front two are lockable
Bright, LED interior lighting
Self-closing door with 90° stop to assist with inventory loads
FDA listed Class II Medical Device, 510K exempt

Product Specification
	TSX1204BZ	TSX2304BZ	TSX3004BZ	TSX5004BZ
Temp. Range (setpoint)	3-7°C (4°C)	3-7°C (4°C)	3-7°C (4°C)	3-7°C (4°C)
Capacity cu. ft./liters (bloodbags)	11.5 / 326 (192)	23 / 650 (385)	29.2 / 827 (426)	51.1 /1447 (770)
Electrical (plug)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)
Doors	1, Glass	1, Glass	1, Glass	2, Glass
Drawers	6	7	6	14
Defrost	Auto	Auto	Auto	Auto
Certifications	CE,cUL	CE,cUL	CE,cUL	CE,cUL
Interior Dimensions: (D x W x H)	21.8 x 20.0 x 52.4 in. (55.4 x 50.8 x 133.1 cm)	28.5 x 24.0 x 58.0 in. (72.3 x 61.0 x 147.3 cm)	28.5 x 30.0 x 58.0 in. (72.3 x 76.2 x 147.3 cm)	28.5 x 52.5 x 58.0 in. (72.4 x 133.4 x 147.3 cm)
Exterior Dimensions: (D x W x H)	30.5 x 24.0 x 73.0 in. (77.5 x 61.9 x 185.4 cm)	37.8 x 28.0 x 78.5 in. (96.0 x 71.1 x 199.4 cm)	37.3 x 34.0 x 78.5 in. (94.7 x 86.4 x 199.4 cm)	37.8 x 56.5 x 78.5 in. (96.0 x 143.5 x 199.4 cm)
Shipping Weight lbs. (kg)	404 (183)	529 (240)	554 (251)	865 (392)
Download Brochure	TSX Series Blood Bank Refrigerators

Thermo Fisher

−30°C PLASMA FREEZERS

TSX Series High-Performance −30°C Plasma Freezers

Our pre-set, high-performance –30°C plasma freezers with automatic defrost are designed to meet strict requirements established by the AABB for the storage of plasma.

Forced-air circulation for temperature uniformity and fast temperature recovery
Convenient, stainless steel, fully extendable and adjustable drawers
GMP Clean Room Class A / ISO 6 (ISO EN 14644-1) compatible with appropriate pre-install preparation
Standard, built-in chart recorder
Four 2" casters for easy mobility; the front two are lockable
Self-closing door with 90° stop to assist with inventory loads
FDA listed Class I Medical Device, 510K exempt

Product Specification
	TSX1230LZ	TSX2330LZ	TSX3030LZ	TSX5030LZ
Temp. Range (setpoint)	-35°C to -15°C (-30°C)	-35°C to -15°C (-30°C)	-35°C to -15°C (-30°C)	-35°C to -15°C (-30°C)
Capacity cu. ft./liters (plasma boxes)	11.5/326 (273)	23.3/659 (532)	29.2/827 (665)	51.1/1447 (1064)
Electrical (plug)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)	208-230V, 60Hz (NEMA 6-15)
Doors	1, Solid	1, Solid	1, Solid	2, Solid
Drawers	7	7	7	14
Defrost	Auto	Auto	Auto	Auto
Certifications	CE,cUL	CE,cUL	CE,cUL	CE,cUL
Interior Dimensions: (D x W x H)	21.8 x 20.0 x 52.4 in. (55.4 x 50.8 x 133.1 cm)	28.5 x 24.0 x 58.0 in. (72.3 x 61.0 x 147.3 cm)	28.5 x 30.0 x 58.0 in. (72.3 x 76.2 x 147.3 cm)	28.5 x 52.5 x 58.0 in. (72.4 x 133.4 x 147.3 cm)
Exterior Dimensions: (D x W x H)	31.1 x 24.0 x 73.0 in. (79.0 x 61.9 x 185.4 cm)	37.9 x 28.0 x 78.5 in. (96.2 x 71.1 x 199.4 cm)	37.9 x 34.0 x 78.5 in. (96.2 x 86.4 x 199.4 cm)	37.9 x 56.5 x 78.5 in. (96.2 x 143.5 x 199.4 cm)
Shipping Weight lbs. (kg)	412 (487)	505 (229)	556 (252)	817 (371)
Download Brochure	TSX Series -30°C Plasma Freezers

Thermo Fisher

ULTRA-LOW TEMPERATURE FREEZERS

User-friendly and quiet

New HIC touch screen user interface
Quiet enough to reside directly in the laboratory; at just 50 dBA, the sound is comparable to a home refrigerator.

Dependable storage with operational savings and sustainability

Easy to use: plug in and go; no setup required
H-drive Information Center (HIC) combines easy-to-read temperature with simple capacitive touch buttons
Advanced security features: alarm settings, setpoint security passcode, and padlock-compatible doors
Egonomic design: single-hand door operation, eye-level display, and shelf-level placement that do not require floor-level loading of racks
Four inner doors minimize ambient temperature during sample retrieval

Thermo Scientific TDE Series Ultra-Low Temperature Freezers

Part of the Standard Performance (STP) family, Thermo Scientific TDE Series ultra-low temperature freezers, powered by H-drive, feature four upright models, maximizing storage capacity from 30,000 up to 60,000 2mL vials. The TDE Series is a sustainable and reliable solution with ultimate sample security and operational savings for every lab.

H-drive hydrocarbon refrigeration system provides sustainable performance with reliability you can count on
Low peak variation helps ensure sample temperature protection throughout entire cabinet
Fast door opening recovery in as little as 11 minutes
Long warm-up time from -80°C to -50°C in up to 5 hours
Four capacities: 300, 400, 500 and 600 2-inch boxes
Decrease storage footprint up to 25%
5-year standard warranty

Designed to keep your samples safe

Worry-free storage; with low peak variation, samples are protected throughout the entire cabinet.1
Secure freezer settings with sample security
Backed by our Global Service and Support Team

Limit environmental impact and lower HVAC costs

Uses as low as 10.7 kWh/day, depending on size
Less heat emission lowers HVAC costs
SNAP compliant, natural hydrocarbon refrigerants
Environmentally-friendly, water-blown foam insulation is compliant with SNAP
Manufactured in an award-winning, zero-waste-to-landfill facility

Performance Data
Model Series	Energy Consumption* (kW-hr/day)	Peak Variation from -80°C Setpoint (°C)**	60 Second Door Opening Recovery Time (minutes)	Warm-Up Time (-80°C to -50°C)(minutes)***	Noise Level (dBA)
TDE30086	10.7	+6.9 / -3.4	11	248	52
TDE40086	12.5	+5.2 / -3.7	16	257	51
TDE50086	12.9	+4.0 / -2.9	20	260	50
TDE60086	13.8	+3.9 / -3.1	24	297	50
Download Brochure	TDE Ultra Low

Abbott

ALINITY H SERIES

Alinity h-series is designed to deliver reliable results needed by the busy hematology lab and is anchored on user feedback to ensure that the laboratory operates efficiently.

Leveraging Abbott’s legacy of experience in optics and reagent development, the Alinity hq uses only three reagents to deliver a CBC with 6-part differential.

Product Specification
	Alinity hq	Alinity hs
System Dimensions (HxDxW)	149.9 cm (59 in) x 91.4 cm (36 in) x 66 cm (26 in)	149.9 cm (59 in) x 91.4 cm (36 in) x 66 cm (26 in)
System Footprint	0.6 m²	0.7 m²
Weight	250 kg (553 lbs)	281 kg (620 lbs)
Maximum Throughput	119/hr for CBC + Differential 70/hr for CBC + Differential + Reticulocyte	65 stained smears per hour*
Technology	WBC and Differential – Optical Scatter and Fluorescence RBC – Optical Scatter and Fluorescence Platelet – Optical Scatter Reticulocytes – Optical Scatter and Fluorescence	Stain and smear, smear only and stain only. Custom Stain protocols can be created. The smear is performed by a single-use blade based on the hematocrit results provided by user, or determined by the integrated analyzer
Reportable Parameters	WBC, 6-part Differential (NEU, %NEU, LYM, %LYM, MONO, %MONO, EOS, %EOS, BASO, %BASO, IG, %IG), RBC, HGB, HCT, MCV, MCH, MCHC, RDW, NRBC, NR/W, RETIC, %R, IRF, MCHr, PLT, MPV, %rP
Reagents and Consumables	Ready to use: WBC Reagent, HGB Reagent, Retic Reagent, Diluent, Autoclean solution	Ready to use: May-Grünwald-Giemsa stain or Wrights Giemsa Stain, Phosphate buffer, Smear Fix, Glass Slides, Slide Label Cartridge, Smear Tape Cartridge
Continuous Access of Reagents and Consumables	Yes	Yes
Flexible STAT Options	Yes. Any tube lane can be designated as a STAT lane
Sample Capacity	120 tubes	80 tubes, 210 blank slides, 120 stained/smeared slides
Sample Aspiration Volume	CBC+ Diff: < 100 μl CBC+ Diff + Retic: < 100 μl	<25 μl
Sample Result Storage	100,000 Result Records, 100 Calibration Files, 1000 QC Files
User Configurable Rules	Reflex and retest based on parameter limits, morphology flags, and delta checks
LAS Integration	Yes, ACCERLATOR a3600 for the Alinity hq-hs-hq and Alinity hq configurations
Download Brochure	Alinity hq	Alinity hs

Abbott

ALINITY CI SERIES

The Alinity ci-series consists of compact, scalable systems to maximize throughput and efficiency, making today’s high-performing laboratories run at their best, today and into the future.

UNIFORMITY

Enable a truly harmonized healthcare system

FLEXIBILITY

Respond to the changing needs of the market and your community with the right capital investment

OPERATIONAL PRODUCTIVITY

Leverage lab technology and data to redefine and improve operational productivity

CONFIDENCE

Quality test results can save lives and reduce the financial impact to your hospital system

Product Specification
	Alinity c	Alinity i	Alinity ci
System Dimensions (HxWxD)	134 x 119 x 117 cm/1.39 m²	134 x 119 x 117 cm/1.39 m²	134 x 199 x 117 cm/2.33 m²
Methods	Photometric, Potentiometric	Chemiluminescence	Photometric, Potentiometric, Chemiluminescence
Maximum Throughput	Up to 1350 TPH	Up to 200 TPH	Up to 1550 TPH
Throughput/m²	Up to 971 TPH/m²	Up to 144 TPH/m²	Up to 665 TPH/m²
Scalability	Up to 4 modules controlled by one System Control Module (SCM)
Continuous Access of Reagents, Calibrators, Controls and Consumables	Yes
Flexible Stat Options	Prioritize single rack as needed or configure multiple fixed positions
Sample Types*	Serum, plasma, urine, cerebrospinal fluid, hemolysate, whole blood	Serum, plasma, whole blood, urine	Serum, plasma, urine, cerebrospinal fluid, hemolysate, whole blood
Sample Capacity	150	150	300
Sample Bar Code Types	Code 128, Standard Code 39, Interleaved 2 of 5, Codabar
Sample Result Storage	200,000
Dead Volume	50 μL (sample cup)
Sample Volume*	1.5–35 μL	2–200 μL	Alinity c: 1.5–35 μL Alinity i: 2–200 μL
Sample Probe Carryover	≤0.1 parts per million†
Reagent Capacity	Up to 70 refrigerated reagent cartridges onboard plus patented ISE (Na+, K+, and Cl-)	Up to 47 refrigerated reagent cartridges onboard	Up to 117 refrigerated reagent cartridges onboard plus patented ISE (Na+, K+, and Cl-)
Reagent Type	100% liquid ready-to-use
Reagent Onboard Stability*	5–60 days	15–30 days	For Alinity c: 5–60 days For Alinity i: 15–30 days
Automated Onboard Calibrators and Controls*	Yes	Yes (controls only)	Alinity c: Yes Alinity i: Yes (controls only)
Calibration Frequency*	1–60 days	15–30 days	For Alinity c: 1–60 days For Alinity i: 15–30 days
Sample, Clot and Bubble Detection	Yes
Reagent Pressure Monitoring	Yes
Sample Interference Measurement	Yes; hemolysis, icterus, and lipemia	No	Yes; hemolysis, icterus, and lipemia (CC only)
On Board Maintenance Records	Yes
Online Error Code Help	Yes
Host Interface	HL7 or ASTM
Remote Diagnostics	AbbottLink
Weight	712 Kg	624 kg	1160 kg
Electrical Requirements	SCM: 90–264 V, 16 amp Each Instrument: 180–264 V, 16 amp
Water Requirements	Average: 27 L/hr Max‡: <30 L/hr	Average: <10 L/hr Max‡: <30 L/hr	Average: ≤37 L/hr Max‡: <60 L/hr
Heat Output (processing)	Average 2005 Btu	Average 1634 Btu	Average 3639 Btu
Noise Level (1 m)	Alinity c: 55.9 dBA Alinity i: 63.4 dBA
Laboratory Automation Connection	ACCELERATOR a3600
Download Brochure	Alinity c	Alinity i	Alinity ci

Abbott

ARCHITECT i1000SR

The ARCHITECT i1000SR immunoassay analyzer meets your laboratory’s high standards by delivering STAT results when you need them. The flexible protocols built into the ARCHITECT i1000SR enhance laboratory workflow and allow you to report results with confidence.

For in vitro diagnostic use only.

Enhanced System and Assay Dynamics

CHEMIFLEX technology with flexible assay protocols provides excellent low-end sensitivity and expanded dynamic ranges
New patented wash cup design and wash algorithm effectively control sample carryover(<0.1 ppm tube to tube)
Pressure differential technology enables detection of clots, bubbles and insufficient sample volume to reduce analytical error and improve patient safety

The benefits: certainty and confidence in the clinical results

Product Specification
Methods	CHEMIFLEX
Maximum Throughput	Up to 100 tests/hour
Sample Types	Serum, Plasma, Whole Blood, Urine
Sample Tubes	Height: 72-102 mm Diameter: 9.6-16.1 mm
Sample Cup	Yes (50 µl dead volume)
Sample Capacity	65
Sample Barcode Types	Code 39, Codabar, Interleaved 2 of 5, Code 128
Sample Result Storage	50,000
Sample Volume	10-150 μL, Average: 62 µL
Automatic Dilution	Yes
Sample Probe Carryover	≤0.1 parts per million
Reagent Capacity	25 refrigerated positions
Reagent Type	100% liquid ready-to-use
Reagent Onboard Stability	14-30 days
Calibration Frequency	Calibrate with new lot number, if controls are out of range or if specified otherwise within the package insert
Sample, Clot and Bubble Detection	Yes
Reagent Pressure Monitoring	Yes
Sample Interference Measurement	No
System Control Center	1 SCC, with color touchscreen monitor, keyboard and mouse
Onboard Maintenance Records	Yes
Online Error Code Help	Yes
Host Interface	Bidirectional, serial RS-232 interface, host query option available
Remote Diagnostics	AbbottLink
Dimensions(H x W x D)	49” x 59” x 30” 124.5 x 149.9 x 76.2 cm
Weight	636 lbs 288 kg
Electrical Requirements	AC 110-120V or 200-240V, ±10%, 50 or 60 Hz self-adjusting
Water Requirements	Purified water to dilute buffer concentrate
Heat Output*	2400 BTU/hr, running mode
Sample Loading	RSH
Download Brochure	i1000

Grifols

PROCLEIX PANTHER SYSTEM

Experience Freedom SIMPLE Operation

INTUITIVE, USER-FRIENDLY SOFTWARE

Offers touchscreen simplicity, providing real-time guidance and status updates throughout all functions
Provides both visual and audio assistance through its task-driven interface

SCHEDULED AND AUTOMATED MAINTENANCE

Provides programmable system maintenance and priming during lab’s off hours
Offers real-time inventory supply updates and status messages throughout the day

SIMPLIFIED INVENTORY MANAGEMENT

Reagents maintain 60-hour on-board stability to reduce operator hands-on time
RFID-labeled bottles reduce manual scanning and operator error
Monitors all aspects of reagent, fluid, and consumable inventory including number of remaining tests, expiration dating, and lot numbers

SMART SIMPLE VERSATILE

The Procleix Panther system combines full automation with versatility and smart operations for efficient NAT processing of blood and plasma.

A comprehensive NAT screening solution in a very compact footprint.

Experience Freedom SMART Design

FULLY INTEGRATED, FULLY AUTOMATED NAT

Performs nucleic acid extraction, amplification, and detection all in a single tube

Improves workflow, achieves Lean operating efficiency by saving operator time and steps
Reduces risk of operator error

Features built-in process controls for sample and results integrity
Reagent calibration valid for 24 hours
Senses liquid levels for reagents and samples to ensure correct levels are present for testing
Requires no end of run controls

FAST ACCESS TO REPORTABLE RESULTS

Releases first reportable result in 3.5 hours, then 5 results every 5 minutes

275 results in 8 hours (IDT)
500 results in 12 hours (IDT)

Product Specification
Sample throughput	Standard: 3.5 hr to first result; 5 results every 5 min thereafter IDT: 275 results in 8 hr; 500 results in 12 hr
Sample capacity	120 sample tubes (15 tubes per rack x 8 racks; with continuous sample loading ability)
Sample barcode types	Code 39, Code 93, Code 128 (ISBT 128), NW7, Interleaved 2 of 5, Codabar, JAN-13, UPC
Reagent capacity	1 reagent kit per lane 4 lanes available to load any combination of assay reagents 2000 test on-board capacity Continuous reagent kit loading ability
Waste capacity	Process 750 tests before unloading liquid and solid waste
Dimensions (W x D x H)	Instrument: 122 x 81.5 x 175 cm (48 x 32 x 69 in) UPS (optional): 21.4 x 41.0 x 32.5 cm (8.4 x 161.1 x 12.8 in) Note: touchscreen monitor adds 45.5 cm (18 in) to width
Clearance requirements	Width: 183 cm, minimum (6 ft; recommended space is 244 cm [8 ft]) Vertical: 198 cm (6.5 ft) Front: 91.4 cm (3 ft) Note: touchscreen monitor adds 45.5 cm (18 in) to width
Weight	Instrument: 363 kg (800 lb) UPS: 34.5 kg (76 lb)
Voltage	Instrument: 100-240 VAC (±10%; single phase) UPS: 110 V-20 amp circuit (dedicated), specified to operate at a minimum of 15 amps (dedicated) UPS: 220 V-10 amp circuit (dedicated), specified to operate at 7.5 amps (dedicated)
Frequency	50/60 Hz, single phase
Power	Instrument and ancillaries: 1400 W (peak; 13 amps @ 100 VAC, 5.4 amps @ 240 VAC)
Operational temperature	15-30°C (59-86°F)
Operational humidity	20-85% (relative, non-condensing)
Operational Altitude	≤2000 m (6562 ft; above sea-level)
Heat dissipation	550 W (1878 BTU/hr; during steady state)
Drain output	None; waste fluids drain to removable containers
Noise output	<70 dBA
Download Brochure	Procleix Panther System

KW

PLASMA THAWER

The line of Thawers has been developed thanks to the partnership between KW and diff erent Key Opinion Leaders of clinical, industrial and research worlds. The product is the gold standard of thawers, granting a fast and safe experience to the fi nal user. The product is covered by the European patent N. EP12425056 that protects the innovative involved technology and solutions.

The KW thawers line, which has several sensors in each pocket, continuously keeps the temperature of each bag under control, ensuring total traceability of the whole thawing process and the perfect homogeneity of the thawed plasma. Thanks to the new water pumps, the systems can subject the bag to a hydro massage treatment, so that the plasma, at the end of thawing, becomes homogeneous by achieving a better quality.

Product Specification
	WPFD 2/4	WPFD 3/6

Thermal FLywheel	25 L	38 L
Temperature Range	Tamb+5°C/+50°C	Tamb+5°C/+50°C
Power Supply	230V/50Hz	230V/50Hz
Nonimal Power	685W	750W
Noise Level	<35dB(A)	<35dB(A)
Internal Surface	Antibacterial HDPE	Antibacterial HDPE
External Surface	Antibacterial HDPE	Antibacterial HDPE
Doors Surface	Antibacterial ABS	Antibacterial ABS
External Sizes L x P x H (mm)	390 x 640 x 420	550 x 640 x 420
Weight	25 kg	40 kg
Download Brochure	KW Plasma Thawer

Products of Global Repute

Blood Bank

COM.TEC

Composeal Mobilea II

Amicore

HB 301

Compodock

Compomat G5+

Compocouch

Compoguard

Cryofuge

Plasma Thawer
2/4 & 3/6

Blood Bank Refrigerators

−30°C Plasma Freezers

TDE Ultra Low Freezers

Alinity CI-Series

Architect i1000sr

Procleix Panther System

BioP

BioR

Composelect

Compoflex

Products of Global Repute

Blood Bank

COM.TEC

Composeal Mobilea II

Amicore

HB 301

Compodock

Compomat G5+

Compocouch

Compoguard

Cryofuge

Plasma Thawer 2/4 & 3/6

Blood Bank Refrigerators

−30°C Plasma Freezers

TDE Ultra Low Freezers

Alinity CI-Series

Architect i1000sr

Procleix Panther System

BioP

BioR

Composelect

Compoflex

Plasma Thawer
2/4 & 3/6